Delivery for items with 20Litre brackets will happen on the 1st week of September.  We are currently waiting for more stock.  

Create a practical sliding campervan toilet setup with the 20L Fix-a-Potty™ Sliding Bracket Kit.

Designed for campervans, motorhomes, vans and RVs using a larger 20L portable toilet, this kit allows the toilet to slide out from under a bed, cupboard or storage area for use, then tuck neatly away again when not required.

The kit includes our 20L Fix-a-Potty™ toilet securing bracket with 400mm silver ball bearing runners already attached, saving you the time and hassle of sourcing and fitting sliders separately.

The Fix-a-Potty™ Bracket securely holds the toilet in position while still allowing the waste tank to be removed for emptying, making it a practical option when preparing your campervan for New Zealand Green Certification self-containment inspection.

PLEASE NOTE: This product includes the bracket and sliding runners only. The portable toilet is not included.

If you also need the toilet, choose our 20L Complete Sliding Toilet Kit, which includes the 20L portable toilet, Fix-a-Potty™ Bracket and sliding runners.

This Kit Includes

• 20L Fix-a-Potty™ Bracket
• 400mm silver ball bearing sliding runners, already attached

Portable toilet is not included.

Designed for Our 20L Portable Toilet

Our compatible 20L portable toilet measures:

• Width: 350mm
• Height: 425mm
• Depth: 410mm
• Freshwater tank: 10 litres
• Waste holding tank: 20 litres

The larger 20L waste tank is a practical choice where additional toilet capacity is required.

Important – Allow 100mm Behind the Toilet

When installing the sliding toilet bracket, you must allow 100mm (10cm) of clear space behind the toilet when it is in its stored position. This space is required for the sliding rails. The sliders/runners are 12mm high.

If using our 20L toilet:

Toilet depth: 410mm
Additional space behind toilet: 100mm
Minimum overall depth to allow: approximately 510mm

The sliding runners themselves are 400mm long.

If your toilet is being installed inside a cupboard and there is not at least 100mm of clear space behind it, this sliding setup will not be suitable for your installation.

You Will Also Need

Four screws or other suitable fixings of your choice to secure the sliders to your campervan or RV floor.

Preparing for Self-Containment?

The Fix-a-Potty™ Bracket is designed to help create a secure fixed portable toilet installation for New Zealand Green Certification self-containment requirements.

The completed vehicle installation remains subject to assessment by your self-containment inspector.

Fix-a-Potty™ is proudly designed, owned and trademarked in New Zealand by Kiwi Self Contained.