Skip to product information
10L Fix-a-Potty™ Sliding Toilet Kit - Kiwi Self Contained
1/3

10L Fix-a-Potty™ Sliding Bracket Kit – Bracket + Runners Only

$184.99

Turn your compatible 10L portable toilet into a practical sliding campervan toilet setup with the Fix-a-Potty™ Sliding Bracket Kit.

Designed for campervans, vans and small RVs where space is limited, this kit allows your toilet to slide out from under a bed, cupboard or storage area for use, then tuck neatly away again when not required.

The kit includes our 10L Fix-a-Potty™ toilet securing bracket with 400mm silver ball bearing runners already attached, saving you the time and hassle of sourcing and fitting sliders separately.

The Fix-a-Potty™ Bracket securely holds the toilet in position while still allowing the waste tank to be removed for emptying, making it a simple and practical option when preparing your campervan for Green Certification self-containment inspection.

This Kit Includes:

  • 10L Fix-a-Potty™ Bracket
  • 400mm silver ball bearing sliding runners, already attached

PLEASE NOTE: TOILET IS NOT INCLUDED.

If you need the toilet as well, choose our 10L Complete Sliding Toilet Kit, which includes the 10L portable toilet, Fix-a-Potty™ Bracket and sliding runners.

Designed for Our 10L Portable Toilet

Our compatible 10L portable toilet measures:

  • Width: 350mm
  • Height: 300mm
  • Depth: 415mm
  • Freshwater tank: 10 litres
  • Waste holding tank: 10 litres

A 10L toilet is suitable for a self-containment setup for up to 2 people.

Important – Allow 100mm Behind the Toilet

When installing the sliding toilet bracket, you must allow 100mm (10cm) of clear space behind the toilet when it is in its stored position. This additional space is required for the sliding rails.  The sliders/runners are 12mm high.

If using our 10L toilet:

Toilet depth: 415mm
Additional space behind toilet: 100mm
Minimum overall depth to allow: approximately 515mm

The sliding runners themselves are 400mm long.

If your toilet is being installed inside a cupboard and there is not at least 100mm of clear space behind it, this sliding setup will not be suitable for your installation.

You Will Also Need:

Four screws or other suitable fixings of your choice to secure the sliders to your campervan or RV floor.

You may also like