Delivery for items with 20Litre brackets will happen on the 1st week of September.  We are currently waiting for more stock.  

Everything you need for a larger-capacity sliding campervan toilet setup in one complete kit.

This kit includes the 20L portable toilet, 20L Fix-a-Potty™ Bracket and 400mm silver ball bearing sliding runners already attached to the bracket.

The sliding system allows the toilet to slide smoothly out into position for use, then tuck neatly away under a bed, cupboard or storage area when not required — helping maximise valuable space inside your campervan, motorhome or RV.

The Fix-a-Potty™ Bracket securely holds the toilet in position while still allowing the waste tank to be removed for emptying.

With its larger 20L waste holding tank, this toilet is a practical choice for self-containment setups requiring toilet capacity for more than 2 people.

This Complete Kit Includes

• 20L portable toilet
• 20L Fix-a-Potty™ Bracket
• 400mm silver ball bearing sliding runners, already attached
• Screw to secure the bracket to the toilet

This is the complete sliding kit and includes the toilet.

If you already have a compatible 20L toilet, we also sell the 20L Fix-a-Potty™ Sliding Bracket Kit – Bracket + Runners Only.

20L Toilet Specifications

Dimensions:

• Width: 350mm
• Height: 425mm
• Depth: 410mm
• Freshwater tank: 10 litres
• Waste holding tank: 20 litres

Important – Allow 100mm Behind the Toilet

The toilet itself is 410mm deep, but the sliding installation requires an additional 100mm (10cm) of clear space behind the toilet when it is in its stored position.

Toilet depth: 410mm
Additional space behind toilet: 100mm
Minimum overall depth to allow: approximately 510mm

The sliding runners themselves are 400mm long.  The sliders/runners are 12mm high.

If you are installing the toilet inside a cupboard, under a bed or within another enclosed space, make sure you have at least 100mm of clear space behind the toilet.

If the toilet sits close to the back of the cupboard and you do not have this additional 100mm, this sliding setup will not be suitable for your installation.

Preparing for Self-Containment?

The Fix-a-Potty™ Bracket is designed to help create a secure fixed toilet installation for vehicles preparing for New Zealand Green Certification self-containment inspection.

The larger 20L waste tank makes this kit particularly useful for vehicles requiring toilet capacity for more than two occupants.

The completed vehicle installation remains subject to assessment by your self-containment inspector.

You Will Also Need

Four screws or other suitable fixings of your choice to secure the sliders to your campervan or RV floor.

Fix-a-Potty™ is proudly designed, owned and trademarked in New Zealand by Kiwi Self Contained.