Everything you need for a compact sliding toilet setup in one complete kit.

This kit includes the 10L portable toilet, 10L Fix-a-Potty™ Bracket and 400mm ball bearing sliding runners already attached to the bracket.

The toilet slides smoothly out into position when needed, then slides neatly back away when not in use — ideal for campervans, vans and small RV spaces where every bit of room counts.

The Fix-a-Potty™ Bracket securely holds the toilet in position while still allowing the waste tank to be removed for emptying.

A 10L toilet is suitable for a self-containment setup for up to 2 people.

This Complete Kit Includes:

• 10L portable toilet
• 10L Fix-a-Potty™ Bracket
• 400mm silver ball bearing sliding runners, already attached
• Screw to secure the bracket to the toilet

This is the complete kit including the toilet.

If you already have a compatible 10L toilet, we also sell the Fix-a-Potty™ Sliding Bracket Kit separately without the toilet.

10L Toilet Size

• Width: 350mm
• Height: 300mm
• Depth: 415mm
• Freshwater tank: 10 litres
• Waste holding tank: 10 litres

Important – Allow Space Behind the Toilet

The toilet itself is 415mm deep, but the sliding installation also requires 100mm (10cm) of clear space behind the toilet when it is in the stored position.  The sliders/runners are 12mm high.

Minimum overall depth to allow: approximately 515mm

The sliding runners are 400mm long.

If you are installing the toilet inside a cupboard, check that you have at least 100mm of clear space behind the toilet.

If the toilet sits close to the back of the cupboard and you do not have this additional 100mm, this sliding setup will not be suitable for your space.

You Will Also Need

Four screws or other suitable fixings of your choice to secure the sliders to your campervan or RV floor.